Calling Technology Cycles; Hiding Cycle Parameters; Setting Data For Cycles - Siemens SINUMERIK 828D Operating Manual

7.9

Calling technology cycles

7.9.1

Hiding cycle parameters

The documentation describes all the possible input parameters for each cycle. Depending on
the settings of the machine manufacturer, certain parameters can be hidden in the screens,
i.e. not displayed. These are then generated with the appropriate default values when the
cycles are called.
For additional information, please refer to the following references:
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
Cycle support
Example
...
7.9.2

Setting data for cycles

Cycle functions can be influenced and configured using machine and setting data.
For additional information, please refer to the following references:
Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. Use the softkeys to select whether you want support for programming
contours, turning, drilling or milling cycles.
2. Select the desired cycle using the softkey in the vertical softkey bar.
3. Enter the parameters and press the "Accept" softkey.
The cycle is transferred to the editor as G code.
Creating a G code program
7.9 Calling technology cycles
231