Siemens SINUMERIK 828D Operating Manual page 571

Parameter Description
Machining
∇ (roughing)
•
Plain text: _ROUGH
∇∇ (semi-finishing)
•
Plain text: _SEMIFIN
∇∇∇ (finishing)
•
Plain text entry: _FINISH
Deselection
•
Plain text entry: _OFF
For "Multi-axis programming yes", the following plain texts are generated in accord-
ance with the machining type:
∇ (roughing) with input of the orientation tolerance
•
Plain text: _ORI_ROUGH
∇∇ (semi-finishing) with input of the orientation tolerance
•
Plain text entry: _ORI_SEMIFIN
∇∇∇ (finishing) with input of the orientation tolerance
•
Plain text entry: _ORI_FINISH
Tolerance Tolerance of the machining axis
Multi-axis Multi-axis program for 5-axis machines
program
Yes
•
The orientation tolerance >0 degrees can be entered here
No
•
The value 1 is entered automatically
Note
The field can be hidden.
Please observe the machine manufacturer's instructions.
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Programming technology functions (cycles)
9.6 Further cycles and functions
Unit
571