Siemens SINUMERIK 828D Operating Manual page 238

Creating a ShopTurn program
8.2 Program views
Figure 8-3
The animated help displays are always displayed with the correct orientation to the selected
coordinate system. The parameters are dynamically displayed in the graphic. The selected
parameter is displayed highlighted in the graphic.
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
238
Parameter screen with dynamic help display
Press the "Graphic view" softkey to toggle between the help display and
the graphic view in the screen.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning