Taper Turning - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Taper turning

The basic effective direction can be selected via the axis direction keys or via the cross-

switching lever. In addition, a taper angle (α1) can also be entered.

Selecting/deselecting the taper turning and changing the angle α1 is only possible in the

reset state.

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Select the axis to be traversed on the machine control panel.

Press the <+> or <-> key on the machine control panel.

Select the direction with the aid of the cross-switching lever.

The axes are moved at the set machining feedrate.

Please refer to the machine manufacturer's specifications.

The active direction is graphically displayed in the basic screen by

means of the wind rose.

"Manual Machine" is active.

Press the "Taper turning" softkey.

Select the tool, spindle, and spindle direction and specify the machining

Enter the desired angle α1.

Working with Manual Machine

15.5 Simple workpiece machining

Sinumerik 840d sl