Siemens SINUMERIK 828D Operating Manual page 448

Programming technology functions (cycles)
9.4 Milling
Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
Milling direction
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Machining
Face C
•
surface
Face Y
•
Peripheral surface C
•
(only for Shop-
Peripheral surface Y
•
Turn)
Position
At the front (face)
•
At the rear (face)
•
Outside (peripheral surface)
•
(only for Shop-
Turn)
Inside (peripheral surface)
•
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for Shop-
Turn)
448
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Pocket" and "Circular pocket" softkeys.
The "Circular Pocket" input window opens.
Complete
•
mm
mm
*
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cut-
ting rate
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
mm/min
mm/tooth
rpm
m/min
Unit
Turning