Storing Any New File - Siemens SINUMERIK 828D Operating Manual

13.4.5

Storing any new file

In each directory or subdirectory you can create a file in any format that you specify.
Note
File extensions
In the NC memory, the extension must have 3 characters, and DIR or WPD are not
permitted.
In the NC memory, you can create the following file types under a workpiece using the "Any"
softkey.
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
13.4 Creating a directory / program / job list / program list
3. Press the "New" softkey.
4. Press the "ShopTurn" softkey.
The "New Step Sequence Program" window opens.
The "ShopTurn" type is specified.
5. Enter the desired program name and press the "OK" softkey.
The program name can contain up to 28 characters (name + dot + 3-
character extension).
You can use all letters (with the exception of special characters, lan-
guage-specific special characters, Asian or Cyrillic characters), num-
bers and underscores (_).
Managing programs
745