Siemens SINUMERIK 828D Operating Manual page 178
Computerized numerical controller for machine tools
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Programming manual (822 pages)
Table of Contents
Advertisement
Machining the workpiece
5.14 Displaying the program runtime and counting workpieces
Procedure
See also
Entering the number of workpieces (Page 258)
178
1.
Select the "Machine" operating area.
2.
Press the <AUTO> key.
3.
Press the "Times, Counter" softkey.
The "Times, Counter" window opens.
4.
Select "Yes" under "Count workpieces" if you want to count completed
workpieces.
5.
Enter the number of workpieces needed in the "Desired workpieces"
field.
The number of workpieces already finished is displayed in "Actual work-
pieces". This value can be corrected if necessary.
After the defined number of workpieces is reached, the current work-
pieces display is automatically reset to zero.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning
Advertisement
Table of Contents
