Activating Easy Message - Siemens SINUMERIK 828D Operating Manual

21.2

Activating Easy Message

To commission the connection to the modem for the SMS Messenger, activate the SIM card
at the initial start-up.
Requirement
The modem is connected and activated.
Procedure
Activating the SIM card
Activating a new SIM card
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Machine manufacturer
The modem is activated via the machine data 51233
$MSN_ENABLE_GSM_MODEM.
Please refer to the machine manufacturer's specifications.
1. Press the "Easy Msg." softkey.
The "SMS Messenger" window appears.
"Status" shows that the SIM card has not been activated with a PIN.
2. Enter the PIN, repeat the PIN and press the "OK" softkey.
3. If you made an incorrect entry several times, enter the PUK code in the
"PUK Input" window and press the "OK" softkey to activate the PUK
code.
The "PIN input" window is opened and you can enter the PIN number as
usual.
1. Press the "Easy Msg." softkey.
The "SMS Messenger" window appears.
"Status" shows that the connection to the modem has been activated.
2. Press the "Settings" softkey.
3. Press the "Delete PIN" softkey to delete the stored PIN.
Enter the new PIN in the "PIN Input" window at the next power up.
Easy Message (828D only)
21.2 Activating Easy Message
869