Calling Number Display - K-Ccis - NEC Univerge SV9100 Manual

Issue 2.0
F
EATURE
This feature permits the number of a calling or called party at another switching
office, to be displayed on a multiline terminal through the K-CCIS network.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
S
YSTEM
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
GPZ-IPLE
O
PERATING
Normal call handling procedures apply.
S
ERVICE
General:



Restrictions:


SV9100 Networking Manual
D
ESCRIPTION
A
VAILABILITY
- OR -
P
ROCEDURES
C
ONDITIONS
Both the caller/calling station number and name can be displayed on an
UNIVERGE SV9100 station if allowed by Class of Service.
For incoming or outgoing K-CCIS calls, the Calling/Called Name and Number
are displayed for the entire length of the call including the Elapsed Call Time.
For an open numbering plan the Office Code number and station number are
displayed for caller/calling station number.
The UNIVERGE SV9100 supports 2~8-Digit station numbers.
When calling over a K-CCIS tandem connection, the calling party number
(CPN) is transferred to the ISDN network.
Calling Number Display – K-CCIS
4-39