NEC Univerge SV9100 Manual page 544

Issue 2.0
Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-12 : GCD-CP10 Network Setup to setup the IP Address,
Subnet-Mask, and Default Gateway addresses.
Caution! If any IP Address or NIC settings are changed, the system must be
reset for the changes to take affect.
Input Data
Item
Item
No.
01 IP Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
02
Subnet 128.0.0.0
Mask
240.0.0.0
254.0.0.0
255.192.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
03 Default 0.0.0.0 ~ 126.255.255.254
Gateway
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
SV9100 Networking Manual
10-12 : GCD-CP10 Network Setup
Input Data
192.0.0.0 224.0.0.0
248.0.0.0 252.0.0.0
255.0.0.0 255.128.0.0
255.224.0.0 255.240.0.0
255.252.0.0 255.254.0.0
255.255.128.0 255.255.192.0
255.255.240.0 255.255.248.0
255.255.254.0 255.255.255.0
255.255.255.192 255.255.255.224
255.255.255.248 255.255.255.252
255.255.255.255
Default Description
Set for GCD-CP10.
192.168.0.10
255.255.255.0 The setting of Subnet
Mask is invalid when
all Host Addresses
are 0.
If the network section
is:
0,
127,
128.0,
191.255,
192.0.0,
223.255.255
The setting of Subnet
Mask is invalid.
0.0.0.0 IP Address for Router.
10-57