NEC Univerge SV9100 Manual page 738

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Program 44-05 : ARS/F-Route Table

higher priority trunk groups are busy, the next order group is used. If a lower priority route is selected, the

caller may be notified with a beep tone.

ARS/F-Route Table Number

SV9100 Networking Manual

Program 44 : ARS/F-Route Setup

to set the ARS/F-Route table. There are four kinds of order. If the

Priority Number

Trunk Group Number

Select the trunk group number to be used for the

outgoing ARS call.

Delete Digits

Enter the number of digits to be deleted from the

dialed number.

Additional Dial Number Table

Enter the table number (defined in Program 44-06)

for additional digits to be dialed.

Select whether or not a beep is heard if a lower

priority trunk group is used to dial out.

Gain Table Number for Internal Calls

Select the gain table number to be used for the

internal call (defined in Program 44-07).

Gain Table Number for Tandem Connections

Select the gain table number to be used for the

tandem call (defined in Program 44-07).

ARS Class of Service

Select the ARS Class of Service to be used for the

table. An extension ARS COS is determined in

Program 26-04-01.

44-05 : ARS/F-Route Table

0 = No Setting

255 = Extension Call

(255 = Delete All)

0 = No Setting

0 = No Setting