Call Forwarding - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Call Forwarding

Call Forwarding Immediate / Busy / No Answer / Busy-No Answer / Both Ring options are available with

the Networking feature.

With a networked system, when Call Forwarding enabled, there is a slight difference in the telephone's dis-

play. With a single system, the extension name is displayed on the extension which has Call Forwarding.

With a networked system, the extension number is displayed.

To activate or cancel Call Forwarding:

1. Press idle SPK key (or lift handset).

2. Dial Call Forwarding condition :

745 = Call Forward Both Ring

742 = Call Forward Busy

744 = Call Forward Busy or not answered

743 = Call Forward No answer

741 = Immediate

3. Dial 1 to set Call Forwarding, Dial 0 to cancel Call Forwarding.

4. Dial destination extension, Voice Mail Master Number.

When you enable Call Forwarding, your Call Forwarding key lights.

Your Call Forwarding (Station) Programmable Function Key flashes when Call Forwarding is activated.

1. Press Call Forwarding key.

PGM 15-07 or SC 751: code 10 for Forward All Calls Immediately

PGM 15-07 or SC 751: code 11 for Forward when Busy

PGM 15-07 or SC 751: code 12 for Forward when Unanswered

PGM 15-07 or SC 751: code 13 for Forward Busy/No Answer

PGM 15-07 or SC 751: code 14 for Forward with Both Ringing

PGM 15-07 or SC 751: code 15 for Follow Me

2. Dial 1 plus extension to enable; dial 0 to disable.

Once you activate Call Forwarding, only your Call Forwarding destination can place an Intercom call to you.

3. Dial destination extension, Voice Mail master number.

You'll hear stutter dial tone when placing a new call.

Your Call Forwarding Programmable Function Key flashes when Call Forwarding is activated.