NEC Univerge SV9100 Manual page 187


Restrictions:





R
ELATED


G
UIDE TO
This guide provides a list of associated Programs that support this feature.
Program/
Description/Selection
Item No.
11-12-06 Service Code Setup (for
Service Access) –Switching
Voice Call and Signal Call
4-108
During Voice Call, the ICM Key is flashing (Red).
The calling party must wait for at least one ring back before Voice Call is
attempted.
After the calling party changes ring back to Voice Call, it cannot be changed
back to tone.
Voice Call cannot be set as the initial call across K-CCIS.
Group Call Pick Up is not allowed to retrieve voice calls over K-CCIS.
Single Line terminals can be used to originate a Voice Call Over K-CCIS.
However, they are not allowed to receive a voice call.
F L
EATURE IST
Station-to-Station Calling – K-CCIS
Handsfree Answerback – K-CCIS
F P
EATURE ROGRAMMING
Assigned Data
Default is 712
Comments
Assigns the access code used to toggle ICM call
between Handsfree Answerback and Forced
Intercom Ringing for Outgoing Intercom calls.
Features and Specifications
Issue 2.0