Tandem Connections; Figure 5-12 Tel 302 (Sip Mlt) Makes Call To Tel 202 (Sip Mlt) Via Ip K-Ccis - NEC Univerge SV9100 Manual

Issue 2.0
SV9100 Networking Manual
3.1.9

Tandem Connections

This example shows Tandem connections assignments made for systems A
and B.
Program 14-01-13
Trunk to Trunk Transfer
0 = Disable
1 = Enable (Default)
Program 14-01-24
Trunk to Trunk Outgoing Caller ID Through
Mode
0 = Disable (Off) (Default)
1 = Enable (On)
Figure 5-12 TEL 302 (SIP MLT) makes call to TEL 202 (SIP MLT) via IP
K-CCIS illustrates calls between two SIP multiline terminals over IP-CCIS.

Figure 5-12 TEL 302 (SIP MLT) makes call to TEL 202 (SIP MLT) via IP K-CCIS

IP Network
System
RTP/Control
TEL 300 TEL 301 TEL 302
System A
System
RTP/Control
TEL 200 TEL 201
System B
Program 14-01-13
Trunk to Trunk Transfer
0 = Disable
1 = Enable (Default)
Program 14-01-24
Trunk to Trunk Outgoing Caller ID Through
Mode
0 = Disable (Off) (Default)
1 = Enable (On)
TEL 202
5-37