NEC Univerge SV9100 Manual page 531

S 15 T
ECTION IME
If a communication server in the network is in a different location, the time zone may
be different. To adjust the clock display on multiline terminals, the user can define the
offset from the Primary System.
The following features are adjusted when the offset is enabled in Program 51-13-02:







Related Programming:




10-44
communication server no longer appears in Program 51-11.
Z S
ONE ETUP
Terminal Time Display
Incoming History/Redial History
VRS Recording Announce
Date and Time Setting by Service Code
Calendar Setting by Service Code
Alarm Clock Setting
Hotel/Motel Wake-Up Call
10-01-01 - 10-01-07 : Time and Date
Change the SV9100 Time and Date through SV9100 programming. Extension
users can also dial Service Code 728 to change the Time, if allowed by an
extension Class of Service.
51-02-02 : NetLink System Individual Setting – Time Zone – Hour
Determine the offset hours from the Primary SV9100. This setting affects the time
display on display telephones (0~24 = -12 ~ +12 hours).
51-02-03 : NetLink System Individual Setting – Time Zone – Minute
Determine the offset minutes from the Primary SV9100. This setting affects the time
display on display telephones (0 ~ 120 = -60 ~ +60 minutes).
51-13-02 : NetLink Option Settings – Time Zone Enhancing
When enabled (1), the time zone is applied to the following items:
LCD Clock Display, Caller ID History, VRS Time Announce, Time and Date Set by
Service Code, Alarm Clock, Hotel Mode Wake-Up Call (time announce included).
When disabled (0), the time zone is applied only to the LCD Clock Display and
Caller ID History.
Program 51-02-02 must also be set for this option.
Issue 2.0
SV9100 NetLink