Figure 5-10 Common Network With Cisco Router; Configuration Examples For Classification And Queuing - NEC Univerge SV9100 Manual

192.168.1.50
Telephone System
5-30
7.7.4

Configuration Examples for Classification and Queuing

Figure 5-10 Common Network with Cisco Router

scenario and an example of a Cisco router configuration.
 This document provides a general description of VoIP technology, but it
does not discuss individual manufacturer solutions. This sample
configuration is provided as a common scenario. It is a good example of
how QoS can be implemented on a router.
IMPORTANT
Figure 5-10 Common Network with Cisco Router
PC
Dallas
100Mbps
192.168.1.1
Managed Switch
Cisco 2621
192.168.1.10
Refer to Table 5-6 Cisco Router Configuration Example
information about the Cisco 2621 router. A description of key commands
follows.
NEC does not endorse or provide support on any third
party equipment unless it is supplied by NEC.
Fort Worth
256Kbps
Private Circuit
(Leased Line)
10.0.0.1 10.0.0.2
Cisco 2621
Issue 2.0
shows a typical network
PC
192.168.2.50
100Mbps
192.168.2.1
Managed Switch
Telephone System
192.168.2.10
for configuration
Network Design Considerations