NEC Univerge SV9100 Manual page 114

Issue 2.0
Using a Multiline Terminal with a call in progress (Open Numbering Plan):
1.
2.
3.
4.
5.
6.
1.
2.
S
ERVICE
General:

Restrictions:


R
ELATED



SV9100 Networking Manual
Press Transfer, and receive internal dial tone. The call is placed on
Non-Exclusive Hold.
Dial the trunk Access Code (normally 8).
Dial the Office Code number.
Dial the distant K-CCIS station number where the call is to be transferred.
Wait for the ringback tone.
Hang up.
- OR -
When the party answers, announce the transfer.
Restore the handset (transfer is completed).
C
ONDITIONS
A UNIVERGE SV9100 station can receive a K-CCIS transferred call as a
camp-on call if allowed by Class of Service.
Trunk-to-Trunk Transfer must be allowed in Program 14-01-13 (Trunk-to-Trunk
Transfer Yes/No Selection).
A blind transfer across a K-CCIS link cannot be completed until ringback tone is
received at the transferring station.
F L
EATURE IST
Link Reconnect – K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
4-35