NEC Univerge SV9100 Manual page 418

Issue 2.0
SV9100 Networking Manual
Manual Login
When set to manual login, no user name, password, or extension number is
entered into the configuration of the telephone. The user is prompted to enter this
user name and password into the IP phone. This information is cross referenced
in the phone system to an associated extension number. If a match is found, the
phone comes online. If there is no match, the phone cannot complete registration
with the CPU. The IP terminal either returns to the login/password screen, or locks
out the user and requires the administrator to unlock the IP terminal. Lockout on
failed attempts is dependent on system programming. Manual mode is good for
an environment where multiple users share the same IP phone at different times.
As one user logs out the next user can login with their credentials and all of their
associated programming follows.
In Manual mode a user can also logoff the IP phone to allow another user to login
with their own login ID and password. To logoff the IP phone use the following
operation:
Press the "Down Arrow" Soft Key, press the "Prog" soft key, and then press the
"LOGOFF" soft key.
Multiple Login
The same user name and password can be assigned to multiple extensions when
using Automatic or Manual Registration. This makes it easier on the user by only
having to remember one password. For example, if a user has an IP Multiline
terminal and uses UC Suite Applications with the Enhancement bundle controlling
the IP Multiline, three different ports are used in the system.
Encryption
The SV9100 Supports AES 128-bit encryption between DT800/DT700 terminals
and the GPZ-IPLE. This feature requires the SV9100 ENCRYPTION LIC which is
a system license. Once installed, any of the DT800/DT700 IP terminals can use
the encryption feature.
Source Destination
DT800/DT700 SDT SIP (P2P)
DT800/DT700 STD SIP (Non P2P)
DT800/DT700 DT800/DT700
DT800/DT700 PSTN
DT800/DT700 IP Network (SIP/H323/
CCIS)
SRTP Comment
N
DT800/DT700 VoIPDB Encryption
S
between DT800/DT700 and
VoIPDB
S
DT800/DT700 VoIPDB Encryption
S
between DT800/DT700 and
VoIPDB
DT800/DT700 VoIPDB Encryption
S
between DT800/DT700 and
VoIPDB
8-27