NEC Univerge SV9100 Manual page 589

Program
Program Name
Number
10-46-01 DT800/DT700 Server Information
Setup - Register Mode
10-46-06 Register Port
Assign the port number to which
the SIP messages are sent to on
the IPLE. This same port number
must be assigned in the SIP
Multiline terminals. If this command
is changed, it requires a CPU
reset .
10-46-13 Subscribe Session Port
10-46-14 NAT Mode
10-58-01 Network Address
11-16
Description/Comments
Normal mode:
When the phone boots up, it
reports the ext. assigned in the
phone or chooses the next
available extension in the system.
No password is required.
Auto mode :
If set to Auto, the SIP user name
and password must be entered in
the actual IP phone. These
settings must match 84-22/
15-05-27, for the phone to come
on-line.
Manual mode:
When the phone boots up it
prompts a user to enter a user ID
and password before logging in. It
checks the user ID/password
against 84-22/15-05-27. If there is
no match, the phone does not
come on-line.
0~65535
0~65535
Turns On/Off the NAT mode of the
system.
This program sets the local area
network of the DT800/DT700
terminal when the system has a
NAT router and a local router.
Assigned Data
1
0 = Normal (default)
1 = Auto
2 = Manual
5080
5081
0 = Off

1 = On
Default = Off
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
Issue 2.0
Level
2 3




NAPT