NEC Univerge SV9100 Manual page 96

Issue 2.0
Program/ Description/
Item No. Selection
15-07-01 Programmable Function
Keys
14-01-13 Basic Trunk Data Setup –
Trunk-to-Trunk Transfer
Loop Supervision
50-06-01 CCIS Feature Availability –
Link Reconnect
50-05-01 CCIS Maximum Call
Forwarding Hop Counter
SV9100 Networking Manual
Assigned Data
10 = Call Forward – Service Codes:
Immediate 741
11 = Call Forward – Busy
12 = Call Forward – No 742
Answer
13 = Call Forward – Busy 743
No Answer
744
0 = Disable Must be enabled for Trunk-to-Trunk Transfer, Call
1 = Enable Forward – Off-Premise, and tandem trunking.
Default is 1
0 = Not Available Enable/Disable Link Reconnect.
1 = Available
Default is 1
0~7 Hops Set Maximum Hops allowed in a CCIS network.
Default is 5
Comments
4-17