Ip Phone Relocation - NEC Univerge SV9100 Manual

Issue 2.0

15.9 IP Phone Relocation

SV9100 Networking Manual
The IP Phone Relocation feature gives users access to their IP telephone from
any location by using the override login function. Users have the flexibility of
logging into their IP Station in the office as well as remotely at the home office.
IP Phone Relocation Override
IP Phone Relocation is a feature for overriding the registration of an IP phone
from various locations. To override the registration of an IP phone, you must have
the login ID and Password of that IP phone.
Conditions
Multiple IP Phones cannot use the same user ID and the same password at the

same time.
When a user is using multiple IP Phones at the same time, the user ID and

password must be different for each phone.
When a user is using SoftPhone (CTI mode) and controlling the IP Phone by

this SoftPhone, the user ID and password should be different for the SoftPhone
and IP Phone.
An IP Phone (IP Phone and Soft phone) with DSS console cannot override

another IP Phone.
An IP Phone (IP Phone and Soft phone) with DSS console cannot be

overridden from another IP Phone.
2-button Phones cannot use the IP Phone Relocation feature.

The login ID and Password are programmed in Program 15-05-27 and

Program 84-22.
IP Phone Relocation can be used only in Manual Registration Mode.

The system sees terminal types 1 (Economy), 2 (Value), 3 (Desi-Less), 4

(Sophisticated), and 5 (Softphone) as the same terminal type.
When using Multiple Login, the same Personal ID index can be assigned to an

ITL/Softphone and a CTI (Desktop).
Two ports of the same terminal type (Program 15-05-26) cannot be assigned to

the same Personal ID index (Program 15-05-27).
Program 10-46-01 must be set to 1 (Auto), or 2 (Manual) for Multiple Login to

work.
When three ports are assigned the same Personal ID index, in Program 15-05-

27, if Program 15-05-26 is not set for those ports, the terminal types will be
assigned based on order of login. If Program 15-05-26 is set, the login order
does not matter and they will assign the correct port.
8-73