NEC Univerge SV9100 Manual page 138

Issue 2.0
G
UIDE TO
This guide provides a list of associated Programs that support this feature.
Program/
Item No.
Class of Service Options
20-08-13
(Outgoing Call Service) – ISDN
CLIP
ISDN Calling Party Number
Setup for Trunks
21-12-01
ISDN Calling Party Number
21-13-01
Setup for Extensions
Basic Trunk Data Setup – Trunk-
to-Trunk Outgoing Caller ID
14-01-24
Through Mode
SV9100 Networking Manual
F P
EATURE ROGRAMMING
Description/
Selection
0=Off
1=On
Default is 0
Up to 16 digits max.
Default is No Setting
Up to 16 digits max.
Default is No Setting
0 = Disable (Off)
1 = Enable (On)
Default is 0
Assigned Data
Determine if the ISDN calling line
identity presentation and screening
indicators are to be allowed.
Assign each trunk a Calling Party
Number.
When a call is made by an extension
which does not have an Extension
Calling Number assigned
(Program 21-13), the system sends the
calling number for the ISDN trunk
defined in 21-12.
Assign each extension a Calling Party
Number.
Enable CPN information to pass through
the Tandem Office.
Comments
4-59