NEC Univerge SV9100 Manual page 530

Issue 2.0
This function allows the Primary System to control 240 slots and, users can check
what kind of blade is installed in each communication server and how many blades
are available in the link.
Virtual Slot Image
Related Programming:

SV9100 Networking Manual
System ID 1 (Primary)
51-10-01 : Remaining Virtual Slots
View the remaining number of slots which can be controlled by NetLink. The
NetLink feature can control up to 240 virtual slots maximum. (The physical slots in
the NetLink network are maintained as virtual slots by the SV9100.)
.
user-definable
Slot Deletion:
1. Unplug the blade from the communications server chassis.
2. Use Program 90-05 : Slot Control and select menu #1 (delete command).
3. Specify the System ID and Slot Number.
The information in the virtual slot is deleted as well.
IMPORTANT
Communication Server Information Deletion:
Using Program 51-14-01 : NetLink System Control – Delete System

Information, Specify the System ID
To use this program, the communications server must not be connected to the
network.
All virtual slot information of the communication server is deleted. The
~
Up to 240 Virtual Slots
System ID 2 (Secondary)
This option is not
10-43