NEC Univerge SV9100 Manual page 360

Program
Program Name/Description
Number
14-05-01 Trunk Group – Trunk Group Number
Assign trunks to trunk groups.
14-18-05 IP Trunk Data Setup – SIP Profile (SIP Trunk)
Assign each SIP Trunk to either Profile 1 or
Profile 2.
15-03-18 Single Line Telephone Basic Data Setup –
Select Special Terminal
Used for selecting Special terminal type (FAX or
Modem). This setting influences how data is
transmitted via SIP trunk.

Program 15-03-03 must be set to 1 (Special) to
use this feature.
21-17-01 IP Trunk (SIP) Calling Party Number Setup
for Trunk
Assign the Caller Party Number for each IP
trunk. The assigned number is sent to the
central office when the caller places an
outgoing call. If the Calling Party Number is
assigned by both Program 21-17 and Program
21-18/ 21-19, the system uses the entry in
Program 21-18/21-19.
21-19-01 IP Trunk (SIP) Calling Party Number Setup
for Extension
Assign the Calling Party Number for each
extension. The assigned number is sent to the
central office when the caller places an
outgoing call. If the Calling Party Number is
assigned by both Program 21-17 and Program
21-18/Program 21-19, the system uses the data
in Program 21-18/Program 21-19.
6-14
Input Data
Trunk Port 1 ~ 400 =
Priority 1 ~ 400
Profile 1
Profile 2
Type:
0 = FAX
1 = Modem
,
0 ~ 9,  # Maximum of 16 digits
,
0 ~ 9,  # Maximum of 16 digits
(Profile 1 ~ Profile 2)
Issue 2.0
Level
Default
1 2
Default = Trunks
1 ~ 400 assigned
to trunk group 1
with priorities

equal to the
trunk number.
Trunk 1 = Priority
1 Trunk 400 =
Priority 400.
Profile 1

0

No Setting

No Setting

SIP Trunking
3