Figure 1-14 Cch Linking; Chapter 1 General Information - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Data Assignment for System B

Data Assignment for System C

Determining CCH Link to Send Messages

The tandem office must be programmed with the proper information to indicate

how the CCH (in its own system) is connected to other offices in the network.

Every office linked to the CCH must be identified by assigning the Point Codes

that it accepts in the network. Refer to

features such as the Link Reconnect – K-CCIS, this must be programmed using

Program 50-06-01. Program 50-03-01 allows the links between each system and

the CCH, through which it is directed, to be assigned.

Figure 1-14 CCH Linking

Point Code: 00001

CCIS Route 1:00002

All of CCIS use Route 1

Figure 1-14 CCH

Point Code: 00002

CCIS Route 1:00001

CCIS Route 2:00003

1:PC00001.Route 1

2:PC00003.Route 2

3:PC00004.Route 2

Point Code: 00003

CCIS Route 1:00002

CCIS Route 2:00004

1:PC00001.Route 1

2:PC00002.Route 1

3:PC00004.Route 2

Assign the Originating Point Code for

Assign the Destination Point Code

Assign the Originating Point Code

for System C

Assign the Destination Point Code

Linking. When using

Point Code: 00004

CCIS Route 1:00003

All of CCIS use Route 1

General Information <US Only>