NEC Univerge SV9100 Manual page 619

Hide thumbs Also See for Univerge SV9100:

Table of Contents

With Camp On, an extension user may call a busy extension and wait in line (Camp-On) without hanging

up. The call goes through when the busy extension becomes free. Camp On helps extension users to get

through as soon as a busy extension becomes free. It also lets callers wait in line for a busy extension

without being forgotten.

When you have set Camp-On you can choose to wait off hook or go on hook. If you go on hook your phone

will ring when the extension becomes free.

With a networked system, camping on to an idle extension and Trunk Queuing/Camp On for a trunk port

are not supported.

With a networked system, when Camp On is enabled, there is a slight difference in the telephone's display.

With a single system, the target extension's name is displayed on the phone which has enabled Call Wait-

ing. With a networked system, the extension number is displayed.

To Camp-On to a busy extension:

1. Call busy extension.

2. Dial Camp-On service code 750

Press Camp-On key (PGM 15-07 or SC 751: 35).

3. You can choose to hang up or not.

To cancel a Camp-On request:

1. Hang up or SPK key.

2. At system phone, press SPK key and dial 770.

At system phone, press Camp-On key (PGM 15-07 or SC 751: 35).

At single line set, lift handset and dial 770.

Related Programs

Program Number

Service Code: Setting Camp On

Service Code: Cancelling Camp On

One-Digit Service Code: Camp On