License - NEC Univerge SV9100 Manual

Issue 2.0
1.3
Number
and Name
of Setting
1. NAT
Traversal
Mode
2. Network
Area Name
3. WAN
Settings
SV9100 Networking Manual
1.2.4

License

The system must be licensed for this feature (License 0031).

The system must be licensed for DT800/DT700 ITL Terminals.

IP Terminal License (5111)

System Port License (0300)

Version 1 License (0411)

Installation
The following settings have been added for NAT traversal in the DT800/DT700
ITL Terminal.
Terminals must be V3.0.0.0 or higher to support the NAPT feature.

1.3.1 Settings for Terminals
NAT Traversal 2. SIP Settings/ 8. NAT Traversal [Eco, Value, Sophisticated]
Setting Default
Value Value
1. Disable 1.
2. Dynamic Disable
3. Static
A character No value Available Available
string
Factory Auto
Value Config
Available Available Settings for NAT Traversal:
Disable: Disables NAT Traversal
Dynamic: Performs NAT
Traversal using a dynamic
conversion table.
Static: Performs NAT Traversal
using a static conversion table and
requires the WAN IP Address to
be entered into the IP Terminal.
The name of the network area to
which terminals belong. Specify
up to 32 alphanumeric characters.
(Optional step)
See table below.
Description
11-3