Figure 8-7 Example Configuration 3 - Static Ip Addressing, Routed Wan - NEC Univerge SV9100 Manual

8.4
8-12
Example Configuration 3 - Static IP Addressing, Routed WAN
This example shows IP Phones connected to an UNIVERGE SV9100 system
over a Wide Area Network (WAN), with static IP addressing. This is a typical
scenario - a small branch office connecting to the main office.

Figure 8-7 Example Configuration 3 - Static IP Addressing, Routed WAN

GCD-CP10: 192.168.1.20
VoIP DSP: 192.168.1.21
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
IP Phone 1
192.168.2.200
GCD-CP10
VoIP
Switch
IP Phone 2
192.168.2.201
Issue 2.0
Switch
Router VPN
192.168.1.254
WAN
(Leased Line, Frame
Relay, etc.)
Router VPN
192.168.2.254
IP Multiline Station (SIP)