NEC Univerge SV9100 Manual page 156

Issue 2.0



G
UIDE TO
This guide provides a list of associated Programs that support this feature.
Program/Item
No.
Basic Extension Data Setup –
15-01-02
Outgoing Trunk Line Preference
Class of Service for Extensions
20-06-01
Class of Service Options
20-08-09
(Outgoing Call Service) – Hotline/
Extension Ringdown
Class of Service Options
(Outgoing Call Service) – Hotline
20-08-19
for SPK
System Options for Outgoing Calls
21-01-09
– Ringdown Extension Timer
(Hotline Start)
Extension Ringdown (Hotline)
Assignment – Hotline Destination
Number
21-11-01
SV9100 Networking Manual
Call Transfer – All Calls - K-CCIS
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
F P
EATURE ROGRAMMING
Description/
Selection
Assigned Data
0 = Off
1 = On
Default is 0
1 ~ 15
Default: Ext.101 is in Class
15. All others are in Class 1.
0 = Off
1 = On
Default is 0
0 = Off
1 = On
Default is 0
0~64800 seconds
Default is 0
Maximum 24 digits
(0~9, , #, Pause, Hook

Flash, and @(code to wait
for answer supervision)
Default is No Setting
Comments
If enabled, the extension user gets
trunk dial tone when the handset is
lifted.
Assign a Class of Service to an
extension
Turn Off or On Ringdown Extension
for extensions with this COS.
When Hotline is programmed and 20-
08-19 is turned ON (1), the user can
press the speaker button and the
Hotline destination is dialed.
A Ringdown extension automatically
calls its programmed destination after
this time.
Define the Hotline Destination number
for each extension number.
4-77