Intercom - NEC Univerge SV9100 Manual

Related Programs

3.18 Intercom

An extension user can make an intercom call to a networked system if the networked extensions are
defined with the Network Access Code (Program 11-01, Dial Type = 8)
A user can change the signaling type for the intercom call they place to either a voice announce or ringing
call to extension in a networked system.
Operation
To place an Intercom call:
1. At system phone, press SPK key.
OR
At single line telephone, lift handset.
2. Dial extension number (or 0 for your operator).
Your call may voice-announce or ring the called extension. Dial 1 to change the way your call alerts the
called extension.
If the extension you call is busy or doesn't answer, you can dial another extension without hanging up.
Related Programs
13-36
Program Number
20-01-04
System Options - Network BLF Indication
20-02-03
System Options for Multi-Line Telephones - BLF Control
20-13-06
Class of Service Options (Supplementary Service) - Automatic Off Hook
Signaling
20-06-01
Class of Service for Extensions
30-02-01
110 button DSS Console Key Assignment
30-05-01
DSS Console Lamp Table
Program Number
11-12-06
Service code of Voice/Signal Change
11-16-03
One digit service code of Voice/Signal Change
20-06-01
Class of Service for Extensions
20-08-01
Class of Service Options (Outgoing Call Service) - Intercom Calls
Title
Title
Issue 2.0
AspireNet