NEC Univerge SV9100 Manual page 193

Program/
Description/Selection
Item No.
20-11-12 Class of Service Options
(Hold/Transfer Service) –
Call Forwarding Off
Premise (External Call
Forwarding)
20-11-13 Class of Service Options
(Hold/Transfer Service) –
Operator Transfer After
Hold Callback
20-11-14 Class of Service Options
(Hold/Transfer Service) –
Trunk-to-trunk Transfer
Restriction
15-07-01 Programmable Function
Keys
14-01-13 Basic Trunk Data Setup –
Trunk-to-Trunk Transfer
Loop Supervision
14-01-22 Basic Trunk Data Setup –
Caller ID to Voice Mail
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
4-114
Assigned Data
0 = Off
1 = On
Default is 0
0 = Off
1 = On
Default is 0
0 = Off
1 = On
Default is 0
10 = Call Forward – Immediate
11 = Call Forward – Busy
12 = Call Forward – No Answer
13 = Call Forward – Busy/No
Answer
0 = Disable (No)
1 = Enable (Yes)
Default is 1
0 = Disable (No)
1 = Enable (Yes
Default is 0
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
Default is 0
Extension Number/ Pilot Number
(eight digits maximum)
Default is No Setting
Comments
Enable Call Forward – Off-Premise at an
extension.
Turn Off or On an extension user ability to
have a call which recalls from hold transfer
to the operator.
Enable Trunk-to-Trunk Transfer Restriction
at an extension.
Service Codes:
741
742
743
744
Must be enabled for Trunk-to-Trunk
Transfer, Call Forward – Off-Premise, and
Tandem Trunking.
Enable the system to send Caller ID Digits
to Voice Mail.
Set the feature for the trunk being
programmed.
Assign destination extension or Department
Group pilot number programmed in PRG
11-07.
Features and Specifications
Issue 2.0