Guide To Feature Programming - NEC Univerge SV9100 Manual

Issue 2.0

15.7 Guide to Feature Programming

Program
Program Name
Number
GCD-CP10 Network
10-12-03 Setup – Default
Gateway
GCD-CP10 Network
10-12-09
Setup – IP Address
GCD-CP10 Network
10-12-10 Setup – Subnet
Mask
IPL Basic Setup – IP
84-26-01
Address
IPL Basic Setup –
84-26-02
RTP Port Number
IPL Basic Setup –
RTCP Port Number
84-26-03
(RTCP Port Number
+1)
SV9100 Networking Manual
Description/Comments
IPLE uses the Default Gateway that
is assigned here.
Assign Layer 3 IP Address to the
IPLE connected to CCPU.
Assign Subnet Mask to the IPLE
connected to CCPU.
Assign an IP Address to IPLE
Assigned Data
0.0.0.0~
126.255.255.254
128.0.0.1~
191.254.255.254
192.0.0.1~
223.255.255.254
Default is 0.0.0.0
0.0.0.0~
126.255.255.254
128.0.0.1~
191.254.255.254
192.0.0.1~
223.255.255.254
Default is 172.16.0.10
Default is 255.255.0.0
Default Value:
172.16.0.10
Range: 0 ~ 65534
Default Values:
RTP Port = 10020
Range: 0 ~ 65534
Default Values:
RTCP Port +1 = 10021
1 2 3
X
X
X
X
X
X
8-51