Ringdown Extension, Internal/External - NEC Univerge SV9100 Manual

Related Programs

3.25 Ringdown Extension, Internal/External

A networked system can have a phone defined as a Ringdown Extension to dial either an internal or exter-
nal number.
Operation
To place a call if your extension has ringdown programmed:
1. Lift handset.
If you want to place a trunk call, press a line key before lifting the handset.
Depending on the setting of your ringdown timer, you may be able to dial an Intercom call before your ring-
down goes through.
If the destination has Handsfree Answerback enabled, your call will voice announce. If the destination has
Forced Intercom Ringing enabled, your call will ring.
Related Programs
13-44
Program Number
11-12-31
Service Code Setup (for Service Access) - Placing a Call in Park
11-12-32
Service Code Setup (for Service Access) - Retrieving Call from Park
20-11-19
Class of Service Options (Hold/Transfer Service) – Normal/Extended Park
If enabled, the recall timer set in Program 24-01-07 is used. If this option is
disabled, the timer in Program 24-01-06 is used.
24-01-06
System Options for Hold - Park Hold Recall Timer – Normal
24-01-07
System Options for Hold - Park Hold Recall Timer – Extended
24-03-01
Extension Park Group assignment
Program Number
20-06-01
Class of Service for Extensions
20-08-09
Class of Service Options (Outgoing Call Service) - Hotline/Extension Ring-
down
21-01-09
System Options for Outgoing Calls - Ringdown Extension Timer
21-11-01
Extension Ringdown (Hotline) Assignments
Title
Title
Issue 2.0
AspireNet