Ip Trunk Calling Party Number Setup; Figure 13 Ip Trunk (H.323/Sip) Calling Party Number Setup For Trunks - NEC UNIVERGE SV8100 Configuration Manual

Windstream Issue 1.0
20-09-02 : Class of Service Options (Incoming Call Service) – Caller ID
Display
This needs to be turned ON per COS, if you want to receive caller ID.
3.11

IP Trunk Calling Party Number Setup

Figure 13 IP Trunk (H.323/SIP) Calling Party Number Setup for Trunks

21-17-01 : IP Trunk (SIP) Calling Party Number Setup for Trunk
On a per trunk basis this populates the "SIP Display Info" field. If a station has a
setting in Program 21-19-01, it will override this field.
This program assigns the Caller Party Number for each IP trunk (10-digit
telephone number). The assigned number is sent to the SIP Trunk Service
Provider when the caller places an outgoing call. If the Calling Party Number is
assigned by both Programs 21-17 and 21-18 or Program 21-19, then the system
uses the entry in Programs 21-18 and 21-19.
 Do not use Program 21-12 for SIP. (Entries: 1-0, *, #)
SIP Trunking Service Configuration Guide 19