NEC Univerge SV9100 Manual page 690

Issue 2.0
11-11 : Service Code Setup (for Setup/Entry Operation)
Level:
IN
Description
Use Program 11-11 : Service Code Setup (for Setup/Entry Operation) to customize the Service
Codes which are used for registration and setup. You can customize additional Service Codes in
Programs 11-10, and 11-12 ~ 11-16.
The following chart shows:
The number of each code (01~65).

The function of the Service Code.

What type of telephones can use the Service Code.

The default entry. For example, dialing 724(Item 19) allows users to turn on or turn off Key Touch

Tone.
Input Data
Item
No.
01
Call Forward – All
02 Call Forward – Busy
03 Call Forward – No Answer
04 Call Forward – Busy/No Answer
05
Call Forward – Both Ring
06 --- Not Used ---
07 Call Forwarding – Follow-Me
08 Do Not Disturb
09 Answer Message Waiting
10
Cancel All Messages Waiting
11 Cancel Message Waiting
12 Alarm Clock
13 Display Language Selection for Multiline
Terminal
SV9100 Networking Manual
Program 11 : System Numbering
Item
Terminal
Default
s
MLT, SLT 741
MLT, SLT 742
MLT, SLT 743
MLT, SLT 744
MLT, SLT 745
MLT, SLT 746
MLT, SLT 747
MLT, SLT 0

MLT, SLT 773
MLT, SLT 771
MLT, SLT 727
MLT 678
Related
Program
11-10-16
20-01-06
15-02
13-95