Table 10-1 Voip Resource Chart - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

S1 = Secondary System #1

S2 = Secondary System #2

Data switches must be manageable

Routers must provide QOS

Adequate bandwidth for estimated VoIP traffic

Depending on how QoS policies are built in the network,

assignments may be needed in the CPU.

VoIP Resource Chart

Primary System

The number of conference blocks in a NetLink network is the same as

a stand-alone system.

Invalid data is displayed in the LCD of the terminal if Program 51-01

The SV9100 can recognize what system that each DT800/DT700

extension(s) are connected to and provide an ARS COS based on the

System (System ID) when using NetLink.

When NetLink is enabled synchronous ringing (PRG 14-02-17)

automatically is disabled. Synchronous ringing is not supported in a

NetLink environment.

Restrictions:

The number of total ports depends on the Primary System.

System ID (Program 51-01-02) must be unique for each system in a

NetLink network.

ACD/MIS can connect to the Primary (Main) site only.

Only one Voice Mail can be installed in a NetLink network.

SV9100 NetLink