NEC Univerge SV9100 Manual page 413

S 12 IP T
ECTION
When an IP Phone connects to the UNIVERGE SV9100 system, it is assigned the
first available port, starting from the value set in Program
The ports are allocated in blocks of two.
For example:



When connecting an IP Phone, the MAC address (ID) is automatically registered in
Program 15-05-02. If the registration in Program 15-05-02 is made manually (before
connecting the telephone) it uses the assigned port number when the telephone is
connected. The MAC address is printed on the barcode label on the bottom of the
telephone. It is a 12-digit alphanumeric number, ranging from 0~9 and A~F.
To delete a telephone registration:
Via Telephone Programming:
Enter Program 90-23-01, and enter the extension number of the IP Phone. Press 1
and Transfer to delete the registration.
Via Web Pro:
Enter Program 90-23-01, and place a check next to the extension number of the IP
Phone. Click on Apply to delete the registration.
8-22
Configuring Options
1. Highlight scope options on the left side. Then right click and choose
Configure Options.
2. Click Advanced and change the vendor class to NECDT800/DT700.
3. Place a check mark next to 141 FTP Address. Down below assign the IP
address of the FTP server. Then click Apply.
4. Place a check mark next to 151 auto config file name. Enter the name of the
config file created using IP Phone Manager. Then click Apply.
5. Place a check mark next to 163 download protocol. Down below change the
HEX address to be 0x1.
6. Click on Apply and OK.
R
ELEPHONE EGISTRATION AND
Insert a GPZ-IPLE
Program 11-02-01 Extension Numbering
Configure a System IP Phone and connect to the LAN
D
ELETION
.
11-02-01
IP Multiline Station (SIP)
Issue 2.0