NEC Univerge SV9100 Manual page 191

R
ELATED





G
UIDE TO
This guide provides a list of associated Memory Blocks that support this feature.
Program/
Description/Selection
Item No.
11-01-01 System Numbering
11-02-01 Extension Numbering
16-01-02 Department Group Basic
Data Setup – Department
Calling Cycle
16-01-03 Department Group Basic
Data Setup – Department
Routing When busy
16-01-04 Department Group Basic
Data Setup – Hunting Mode
4-112
F L
EATURE IST
Key-Common Channel Interoffice Signaling (K-CCIS)
Call Forwarding – All Calls - K-CCIS
Call Forwarding – Busy/No Answer - K-CCIS
Multiple Call Forwarding – All Calls - K-CCIS
Multiple Call Forwarding – Busy/No Answer - K-CCIS
F P
EATURE ROGRAMMING
Assigned Data
1 = Service Code
2 = Extension Number
3 = Trunk Access
4 = Special Trunk access
5 = Operator Access
6 = Flexible Routing
7 = Not Used
8 = Networking Access System
9 = Dial Extension Analyze
Assign Station Numbers to Port
Numbers
0 = Normal Routing (Priority)
1 = Easy – UCD Routing
(Circular)
Default is 0
0 = Normal (Intercom caller to
busy department member hears
busy)
1 = Circular (Intercom callers to
busy department member route
to idle member)
Default is 0
0 = Last extension is called and
hunting is stopped
1 = Circular
Default is 0
Comments
Defaults for 1X, 2X, and 3X = 2 Extension
Number.
Defaults for Ports 1~960:
101-199
3101-3961
Set the call routing for Department Calling.
Assign how the system routes an Intercom
Call to a busy Department Group member.
Assign the action taken when a call reaches
the last extension in the Department Group.
Features and Specifications
Issue 2.0