Local Numbering Plan Assignment; 4.2.10 Closed Numbering Plan - Using Closed Number Blocks - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:
Table of Contents

Advertisement

Program/
Item No.
Program/
2-10
4.2.9

Local Numbering Plan Assignment

Use the table below to make local numbering plan assignments.
Description/
Selection
11-01-01
System Numbering
11-02-01
Extension
Numbering
11-04-01
Virtual Extension
Numbering

4.2.10 Closed Numbering Plan - using Closed Number Blocks

Use the table below to make closed numbering plan assignments.
Description/
Item No.
Selection
11-01-01
System Numbering
44-02-01
Dial Analysis Table for
ARS/F-Route Access –
Number of digits to be
analyzed by the system
44-02-02
Dial Analysis Table for
ARS/F-Route Access –
Service Type
44-02-03
Dial Analysis Table for
ARS/F-Route Access –
Additional Data
44-05-01
ARS/F-Route Table –
Trunk Group Number
Assigned Data
0 = Not Used
1 = Service Code
2 = Extension Number
3 = Trunk Access
4 = Special Trunk Access
5 = Operator Access
6 = Flexible Routing
9 = Dial Extension Analyze
Assign Station Numbers to
Port Numbers
Assign Station Numbers to
Port Numbers
Assigned Data
2 = Extension Number
Up to eight digits can be
assigned.
Default is No Setting
0 = No Setting (None)
2 = ARS/F-Route Table
(F-Route)
Default is 0
2 = 0~500
(0=No Setting)
Default is 0
0 = No Setting
1 ~ 100 = Trunk Group
from PRG14-05
101 ~ 150 = Networking
255 = Extension Call
Default is 0
Issue 2.0
Comments
Defaults for 1X, 2X, 3X = 2
Extension Number.
Defaults for Ports
Port 1 ~ 99 = 101 ~ 199
Port 100 ~ 960 = 3101 ~ 3961
Defaults for Ports
Ports 1 ~ 99 = 201 ~ 299
Ports 100 ~ 512 = No setting
Comments
Defaults for 1X, 2X, 3X = 2
Extension Number.
Assign the digits to be dialed across
the K-CCIS link. These digits were
assigned as F-Route in Program
11-01-01
(Use line key 1 for "Don't Care"
digit, @)
The service type (2) assigns the
digits to be dialed to an F-Route.
Program 44-02-03 assigns the F-
Route to be used.
When setting data is (2), refer to
Program 44-05.
Select the trunk group to be used
for the outgoing K-CCIS call.
IP Networking

Advertisement

Table of Contents
loading

Table of Contents