NEC Univerge SV9100 Manual page 558

Issue 2.0
Level:
IN
Description
Use Program 51-09 : NetLink Communication Port Settings to set the various
communication ports used on the system.
Input Data
Item
No.
01
02
03
04
05
06
SV9100 Networking Manual
51-09 : NetLink Communication Port Settings
Item
Primary Waiting Port
Set the communication port that the Primary
system uses to communicate with the
Secondary system.
Communication Waiting Port
Port used to communicate between nodes. It is
always opened by all nodes.
Secondary Communication Port
Secondary system communicates with Primary
system at this port number. If 0 is specified,
temporary port is selected dynamically.
Primary Search Port
When Fail-Over occurred, each system
communicates with other system at this port
number.
If 0 is set, temporary port is selected
dynamically.
If 0 is not specified, the number and continuous
maximum 50 number is used.
(Ex. 5000 is specified 5001, 5002...5049 are
used).
Primary Detection Port
Enter port number to seek the Top Priority
Primary system.
If 0 is specified, temporary port is selected
dynamically.
Database Replication Communication
Listening Port
Replicate the database.
Program 51 : NetLink Service
Input Data
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
Default
58000
58001
0
0
0
58002
10-71