NEC Univerge SV9100 Manual page 477

Program
Program Name
Number
SIP Registar/Proxy
10-33-02 Information Basic Setup
- Authentication Mode
10-33-05 SIP Registar/Proxy
Information Basic Setup
– NAT Mode
10-37-01 UPnP Setup – UPnP
Mode
10-58-01 Network Address
9-10
Description/Comments
When connecting a standard
SIP terminal via NAT, this
opion must be enabled to
prohibit illegal SIP phone
registration.
When system controls remote
SIP phone via NAT router, set
this program to 1 = Enable.
Enable/Disable UPnP.
This program sets the IP or
Network address for phones
that are not to be routed
through the NAPT
translations.
For example, if a system had
multiple NAPT phones and
another site, with multiple IP
phones connected via a VPN
connection, you would not
want the phones connected
over the VPN to use the
NAPT feature. The network
address (or single IP phone
addresses) of the Remote
location would be entered
here. This is for the IP
Phones at this location to not
use the NAPT feature.
Assigned Data 1
0 = Disable
X
1 = Enable
(default = 0)
0 = Disable
1 = Enable X
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
IP Single Line Telephone (SIP)
Issue 2.0
2 3
X
X