NEC Univerge SV9100 Manual page 565

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Use Program 51-15: Demonstration Setting to automatically set the minimum

setting values in NetLink. A system reset occurs after this command is executed..

Feature Cross Reference

Program 51 : NetLink Service

51-15 : Demonstration Setting

This program is available only via telephone programming and not through PC

Programming.

1 = Primary automatic setting

2 = Secondary 1 - automatic operation setting

3 = Secondary 2 - automatic operation setting

4 = Secondary 3 - automatic operation setting

SV9100 NetLink