Entering Vlan Settings By Phone (Voice Packets Only) - NEC Univerge SV9100 Manual

8-36

15.3.4 Entering VLAN Settings by Phone (Voice Packets Only)

Follow these steps to enter VLAN settings using a telephone.
1. Log in. Refer to Section
8-30.
2. Press and hold the phone Menu button until the screen changes.
3. Press 0 on the dial pad to access Configuration.
4. Press the OK soft key. No login or password is associated with the IP
terminal in the default state.
5. Press 1 on the dial pad for Network Settings.
6. Press 6 on the dial pad for Advanced Settings
7. Press 1 on the dial pad for LAN Port Settings (VLAN for the voice
packets only)
8. Press 2 on the dial pad for VLAN Mode
9. Press 1 or 2 to disable/enable the VLAN for the voice packets. Press
the OK soft key after the setting is changed.
10. Press 3 on the dial pad for VLAN ID
11. Enter a valid VLAN ID of 1~4094. Press the OK soft key after the
setting is changed.
12. Press 4 on the dial pad for VLAN Priority
13. Enter the VLAN priority of 0~7. Press the OK soft key after the setting
is changed.
14. If no more changes are made, press the Exit soft key three times.
Then press the Save soft key, and the phone reboots.
15.3.5 Entering VLAN Settings for PC Port by Phone (Data Packets
Only)
Follow these steps to enter the VLAN setting for PC port using a telephone.
1. Log in. Refer to Section
8-30.
2. Access the main menu.
3. Press 6 on the dial pad for Advanced Settings.
4. Press 2 on the dial pad for PC Port Settings.
5. Press 2 on the dial pad for Port VLAN Mode.
6. Press 1 or 2 to disable/enable the VLAN for the data packets. Press
the OK soft key after the setting is changed.
7. Press 3 on the dial pad for Port VLAN ID.
15.3.1 Logging In on the PC on page
15.3.1 Logging In on the PC on page
IP Multiline Station (SIP)
Issue 2.0