K-Ccis Call Rerouting; Figure 4-1 K-Ccis Call Rerouting - NEC Univerge SV9100 Manual

Issue 2.0

K-CCIS Call Rerouting

F D
EATURE ESCRIPTION
The CCIS Call Rerouting feature allows a system to use multiple call routing priorities
when remote system trunks are all busy. The four priorities can be local or remote
trunks. For example using ARS and F-Route table priorities the system can try up to
four remote systems or up to three remote systems and a local trunk to route the
outbound call to its destination. If an outbound route is unavailable for any reason the
call will fall through to the next priority.

Figure 4-1 K-CCIS Call Rerouting

TRG1 All Busy
0
2) TRG10 3) TRG10
TRG1 isIdle
S A
YSTEM VAILABILITY
Terminal Type:
All Terminals
Required Components:
GCD-CP10
GPZ-IPLE
K-CCIS License (0016)
4-18 Features and Specifications