NEC Univerge SV9100 Manual page 162

Issue 2.0
To set Call Forward – All Calls – K-CCIS from a Multiline Telephone (Open
Numbering Plan):
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
To cancel Call Forward – All Calls – K-CCIS from a Multiline Telephone:
1.
2.
3.
1.
2.
3.
S
ERVICE
General:



SV9100 Networking Manual
Press the Call Forward – All Call ON/OFF key, and Dial 1 to set.
Dial the trunk Access Code (normally 8).
Dial the Office Code number.
Dial the distant K-CCIS station number.
Press Speaker.
- OR -
Lift the handset or press Speaker.
Dial Access Code 741 (set as default), and Dial 1 to set.
Dial the trunk Access Code (normally 8).
Dial the Office Code number.
Dial the distant K-CCIS station number.
Restore handset or press Speaker.
Press Call Forward – All Call On/Off key.
Dial 0 to cancel.
Press Speaker.
- OR -
Lift the handset or press Speaker.
Dial Access Code 741 (set as default), and Dial 0 to cancel.
Restore handset or press Speaker.
C
ONDITIONS
Multiple Call Forwarding – All Calls – K-CCIS can forward a call up to seven
times across K-CCIS links (up to seven hops) depending on system data.
Multiple Call Forwarding over a K-CCIS link is combined with Multiple Call
Forwarding – All Calls/Busy/No Answer.
If the calling station is set as the destination in a multiple hop scenario, Multiple
Call Forwarding – All Calls – K-CCIS is not performed (i.e., an infinite loop does
not occur).
4-83