Table 7-2 Voipdb Network Configuration Assignments; Table 7-3 Voipdb (Dsp) Basic Assignments; Configure Voipdb Networking Information - NEC Univerge SV9100 Manual

Table 7-2 VoIPDB Network Configuration Assignments

Program/ Description/
Item No. Selection
IP Trunk Availability – Trunk
Type
10-68-01
IP Trunk Availability – Start
10-68-02
Port
IP Trunk Availability –
10-68-03 Number of Ports

Table 7-3 VoIPDB (DSP) Basic Assignments

Program/ Description/
Item No. Selection
IPL Basic Setup – IP Address Default = 172.16.0.20
84-26-01
IPL Basic Setup – RTP Port
Number
84-26-02
IPL Basic Setup – RTCP Port
Number
84-26-03
(RTCP Port Number + 1)
7-4
2.2.2

Configure VoIPDB Networking Information

Use the following programs to assign VoIPDB network configuration
information.
Assigned Data
0: None
1: SIP
2: H.323
3: CCIS
Range: 0 ~ 400
Default is 0
Range: 0 ~ 400
Default is 0
2.2.3 VoIPDB (DSP) Basic Setup
Use the following programs to assign VoIPDB (DSP) basic setup
information.
Assigned Data
0~65534
Default = 10020
0~65534
Default = 10021
Comments
Assign the H.323 Trunk Availability
Assign the start port number of H.323
Trunks
Assign the Number of H.323 Trunks
Comments
When installing GPZ-IPLE in
UNIVERGE SV9100 system, only 1
IP address is assigned.
Assign the RTP Port Number.
Assign the RTCP Port Number.
H.323 Trunking
Issue 2.0