NEC Univerge SV9100 Manual page 735

Level:
IN
Description
When Program 44-02-02 is set to type 3, use Program 44-03 : Dial Analysis Extension Table to set
the dial extension analysis table. These tables are used when the analyzed digits must be more than
eight digits. If the received digits do not match the digits set in tables 1~250, table number 252 is used to
refer to the next Extension Table Area (1~4) to be searched. If the received digits are not identified in
tables 1~250, the F-Route selection table number defined in table 251 is used.
Input Data
Extension Table Area Number
Dial Analysis Table Number
Dial Analysis Table Number : 1~250
Item
No.
01
Dial
02 ARS/F-Route Select
Table Number
13-140
Program 44 : ARS/F-Route Setup
44-03 : Dial Analysis Extension Table
Item
Up to 24 digits
Digits = 1~9, 0, *,
(Press Line Key 1 for wild character @)
0~500 (ARS/F-Route Table Number)
With Program 44-01 set to 0, Program 44-05 is
checked.
With Program 44-01 set to 1, Program 44-04 is
checked.
1~4
1~252
Input Data
, @
#
Issue 2.0
Default
No Setting
0
AspireNet