NEC Univerge SV9100 Manual page 140

Issue 2.0




Restrictions:



R
ELATED





G
UIDE TO
This guide provides a list of associated Programs that support this feature.
For Main System
Program/
Description/Selection
Item No.
11-01-01 System Numbering
SV9100 Networking Manual
This feature is also available when the Attendant Console is in a NEAX2000
IVS2 or NEAX2400 in the CCIS network.
When an UNIVERGE SV9100 station calls a NEAX Desk Console Attendant
Position, OPERATOR is displayed on the LCD during the incoming ring. If
using an Open Number Plan, the office code of the Desk Console is also
displayed.
In a Closed Numbering Plan network, a station can call an Attendant in the
K-CCIS network by dialing 0.
In an Open Numbering Plan network, a station user can call an Attendant within
the K-CCIS network by dialing: Access Code + Office Code + 0.
When a PBX is in Night Mode, calls to a NEAX Desk Console are restricted.
When an UNIVERGE SV9100 station calls a NEAX Desk Console Attendant
Position that is set to Night Mode, ERROR is displayed in the calling station
LCD and the call is rejected.
When a NEAX Desk Console Attendant Position calls an UNIVERGE SV9100
station, the UNIVERGE SV9100 station does not store the call in the Caller ID
Scrolling feature. This call record can be printed on SMDR without Caller ID
information.
Operator Calling, PRG 20-14-05, does not keep a Tie Line caller from dialing 0
for the operator.
F L
EATURE IST
Attendant Positions
Calling Name Display – K-CCIS
Calling Number Display – K-CCIS
Centralized Day/Night Mode Change – K-CCIS
Voice Calls – K-CCIS
F P
EATURE ROGRAMMING
Assigned Data
Default is
0 = 1 digit Intercom
Comments
Refer to UNIVERGE SV9100 Programming
Manual for all options and default settings.
4-61