Section 14 Slot Control - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Primary System

Secondary System 1 Connected First

Secondary System 2 Connected Second

As described above, port assignment is performed in the order which the

communication server connects. With this condition, if a GCD-4COT is installed to

the Communication Server 1

the slots (and not have them automatically assigned by the communication server),

When performing a Remote Upgrade, you must connect to each individual system in

a NetLink Network. A Remote Upgrade to the Primary System does not upgrade the

Secondary Systems.

In the NetLink, the Primary System needs to control all the slots of the Secondary

Systems. For the Primary System to handle more slots, there is a Virtual Slot

Function in NetLink.

Ext port: 1 16

Trunk port: 1 4

Trunk port: 5 12

Ext port: 17 32

Ext port: 33 40

Trunk port: 13 20

Ext port: 41 56

Trunk port: 21 24

slot 5, the trunk ports are from 25 to 28. To predefine

SV9100 NetLink