Issue 2.0
Figure 8-17 LAN Port Settings Window
SV9100 Networking Manual
15.3.2 Tagging Voice Packets Using IP Phone
Follow these steps to program for voice packet tagging using an IP
telephone.
1.
Log in. Refer to Section
8-30.
2.
To apply a tag to the voice packets only, go to Network
Settings>Advanced Settings>LAN port settings.
3.
Access the following three menus to select options for LAN Port
Settings:
VLAN Mode
VLAN ID
VLAN Priority
4.
Select the VLAN Mode to enable or disable this feature.
15.3.1 Logging In on the PC on page
8-31